Introduction
This documentation will guide you through all of the steps needed to set up the On Request Transfers. This option's functionality is to add Cars that are not in the GDS and due to it being added in the Website Settings, it will be applied to every Travel Group on the Website.
TABLE OF CONTENTS
Setup
To enable On Request Transfers, we would first need to access the Website Settings on our Website.
The On Request Transfers option can be used for both Leisure and Corporate websites.
After logging into the Website, we will be able to select the Website tab:
Image 1. Websites Tab Location
After this, the drop-down menu will appear, on which we will select the View Websites to access the List of the Websites available:
Image 2. View Website Location
Next up, we will see a List of the available Websites, now we just have to select the Edit Website option found in the Actions Menu:
Image 3-4. Website Settings Location
We will now be redirected to the Website Settings where amongst all other options, we can find the On Request Cars option and enable it.
Image 5. On Request Transfers Option Location
Updating the Website Settings will cause a new Tab to appear for us called "On Request Transfers".
Image 6. On Request Transfers Tab Location
Accessing this Tab, we will be able to see the Empty List of Car Vendors, and we can Add a Vendor to populate the List.
Car Vendors
Image 7. Car Transfers Vendors - Add Vendor Button
If we select the Add a Vendor button, we will be redirected to a new Window showing us the Vendor Description, on which we can add the relevant information about the Vendor itself.
Image 8. Car Vendor - Information
You should see the option to add the Office Location and add the relevant Vehicles information which you will use as transfers:
Image 9. Additional options
| Option Name | Description |
| Name | Here we are able to set the Name of the Vendor itself which we want to show to our Customers. This is the only Mandatory field in the Vendor Description section. |
| Logo | Here, we are able to Upload the Logo of the On Request Car Vendor for which we are adding the information. The Format of the Image must be in a .png format and 55x55 resolution. |
Table 1. - Car Vendor - Options Explanation
Pressing Save, all of the Options set on this Window will be saved in the System and we will be notified by the Pop-up notification:
Image 10. Pop-up Notification
The Vendor Description fields will now be shown filled with information that can be modified any time.
Image 11. Car Vendor - Added information showcase
Afterwards, we will be able to see two additional options being shown to us, which will require more information about the Vendor or rather the Vendor's Office Location and Vehicles.
Image 12. Car Vendor - Additional Options (Office Locations and Vehicles)
Office Locations
In order to add new Office Locations, we need to press the Add Location button.
Image 13. Office Locations - Add Location Button Location
After that, a new window will appear showing us all of the information which we will be able to input in order to set the Office Location itself.
Image 14. Office Locations - Information
| Option Name | Description |
| City or Airport | Here we can enter the name of the City or Airport on which this Vendor will be shown. This can be done multiple times if there are multiple locations where the Vendor operates. |
| Address | The exact Address can additionally be added if we want to provide this information to our Customer. |
| Phone Number | The Phone Number can also be added as a Contact Information of the Vendor. |
| Opens/Closes | This option will dictate the availability of the Vendor. The Customers will not be able to see the Vendor outside of its working ours. |
| Radius | This will help you specify the radius on which transfers will rely on (the price is calculated per radius). The maximum radius is 100km. |
Table 2. Office Locations - Options Explanation
After adding all of the relevant information regarding the Vendor's Location, we can Save the changes and the Notification Pop-Up will be shown.
Image 15. Pop-up Notification
The Location List will also be updated with our previously provided information.
Image 16. Office Locations - Office List and Information
We will be able to Edit the chosen Location at any time by pressing the Edit button, Delete the location at any time by pressing the Delete button and/or add additional locations by pressing the Add Location Button:
Image 17. Office Locations - Edit and Delete Buttons
Vehicles
After the Office Locations have been added, we can add the Vehicles themselves by pressing the Add Item button under the Vehicles section:
Image 18. Vehicles - Add Item Button
Pressing the Add Item button will redirect us to a new tab called Vehicle, here we can add all of the relevant information regarding the Vehicles themselves and their respective details.
General Info
Image 19. Vehicles - Information
| Option Name | Description |
| Brand | This option dictates which Car Brand the vehicle is. e.g. Ford |
| Model | This option dictates which Model of the previously added Brand the vehicle is. e.g. Focus |
| Vehicle Image | We are able to add the Image of the Vehicle we are adding which will later be shown to the Customer in the Search Results. The Vehicle Image must be in the .png Format. |
| Category | This option dictates which Category the vehicle is. e.g. All Terrain/2-3 Door |
| Type | This option dictates the Type of the Vehicle itself. e.g. Compact/Mini/Luxury |
| Air Condition | This option will let us choose whether the Car itself has the Air Condition Available. |
| Automatic Transmission | This option will let us choose whether the Car itself has the Automatic Transmission Available. |
| Free Mileage Type | Here, we will be able to set whether the Free Mileage is Limited or Unlimited. |
| Quantity | Setting the Free Mileage Type option to Limited will enable this option and let us choose the Limit for the Amount of the mileage Unit (whether it is Kilometers or Miles). |
| Unit | Setting the Free Mileage Type option to Limited will enable this option and let us choose the Unit for which the Quantity was previously added. There are 2 Unit options available: - Kilometers - Miles |
| Rate Conditions | In this field, we are able to add Rate Conditions if there are any to add. |
Table 3. Vehicle - Options Explanation
After all of the information has been added, we can press the Save Button and a Notification Pop-up will be shown to us letting us know that the Data has been saved.
Image 20. Pop-up Notification
Now we will be able to see the Vehicle we have added in the List of the Vehicles in the previous Menu:
Image 21. Vehicles - List and Information
As the Office Locations, the Vehicles can also be modified (Edit/Delete) and/or additional Vehicles can be added to the List.
Image 22. Vehicles - Edit and Delete Buttons
If we select the Edit button, we will see that multiple tabs allowing us to add mandatory information regarding the Vehicles.
Image 23. Vehicle - Additional Tabs
The First additional Tab we can see is the Prices tab, here we will be able to add all of the Pricing details for the chosen Vehicle.
Image 24. Vehicle - Prices Tab Information
| Option Name | Description |
| Base Price | Set the Base Price of the Vehicle. |
| Start Date/End Date | Choose the Start and the End date of the Pricing to take place. |
| From/To | Specify the radius for which the base price will be charged |
| Minimal Days | Choose Minimal days of rental for this Vehicle. |
Table 4. Prices - Options Explanation
After adding all of the relevant information, we can press the Add button to Add our Vehicle's pricing information.
The Notification Pop-up will be shown to let us know that the Data was saved.
Image 25. Pop-up Notification
Now we will be able to see all of the Pricings for this particular Vehicle in the List:
Prices
Image 26. Pricing - Added Prices
We can now switch tabs to the next one - Taxes and Surcharges.
Taxes and Surcharges
Image 27. Vehicle - Taxes and Surcharges Information
Here we will be able to add all of the Taxes related to the Vehicle itself.
| Option Name | Description |
| Description | Description of the Tax we are applying to the Vehicle. |
| Rate | We can add the Rate Amount here. |
| Rate Type | Here we can choose whether we want the Rate to be applied Per Rental or Per Day. |
Table 5. Taxes and Surcharges- Options Explanation
After the data has been added, we can press the Add button to save the changes.
The Notification Pop-up will be shown to let us know that the Data was saved.
Image 28. Pop-up Notification
Additional options
Due to the Similarity of the Fields located in the next tab, Additional options, you will have abbility to add additional option that can be included in that transfers.
Protections and Coverages / Rental Options
Image 29. Vehicle - Additional options
| Option Name | Description |
| Description | Description of the charge we are applying to the Vehicle. |
| Rate | We can add the Rate Amount here. |
| Rate Type | Here we can choose whether we want the Rate to be applied Per Rental or Per Day. |
| Included | Choose whether this charge is included with the base pricing of the Vehicle or if it is paid individually. |
Table 6. Additional options- Explanation
After the data has been added, we can press the Add button to save the changes.
The Notification Pop-up will be shown to let us know that the Data was saved.
Image 30. Pop-up Notification
We have now finished adding a fully usable On Request Transfers, as can be seen if we go back to the On Request Transfers tab by pressing directly on the tab or by pressing the Back button.
Image 31. Car Vendor- Returning to Car Vendor List
This will take us back to the initial list of the Car Vendors.
Image 32. Car Vendors - Car Vendor List
Here, we can at any time modify (Edit/Delete) the Vendors and/or add new Vendors by pressing the Add a Vendor button.
Image 33. Car Vendors - Car Vendor Edit and Delete Buttons
Examples
To see our On Request Transfers, we will take some things into consideration:
Vendor Name, Office Location, Working Hours and the Vehicle Brand/Vehicle Details.
Image 34. Car Vendors - Car Vendor Important Information
In the Booking Engine, we will need to input this information in order to see our On Request Transfer, first step will be to choose the Transfer module on the booking engine:
Image 35. On Request Transfer Search Engine
Note that Working Hours and Minimal Rental Duration need to be considered when searching for the Car Vendors as we have previously set some of the Rules that the On Request Car will follow.
We will be able to see our On Request Car in the Search Results now, as well as in the Filters:
Image 36. On Request Transfer Shown in Search Results
The price will be charged per destination that we specified in the settings.
The start position will look at the location added in the settings and it will be calculated per the destination where you choose to go.
Note: Be aware that if the location that you are searching for is more then what you specified as radius in the setup, you wont be able to see any result.
This functionality allows you to charge the price per kilometer.